Reptilia ROF Riser 2.5mm for Trijicon RMR & SRO

The Reptilia ROF Riser is a 2.5mm spacer plate for the Trijicon RMR & SRO, fitting between a Reptilia ROF mount and the red dot to lift the optic clear of tall turrets and large scope bells.

2.5mm of clearance, 8.6 g of aluminium. The cheapest fix for a red dot that fouls the turret.

A ROF mount carries the red dot close to the scope on purpose, and on most builds that is exactly right. Fit a scope with tall tactical turrets or a large objective bell, though, and the dot can end up sitting where the turret cap wants to be, or low enough that the scope body crowds the sight picture. The riser is Reptilia's answer: an add-on plate that raises the optic on the ROF by a measured amount without changing anything else about the mount.

It is machined from billet 7075-T6 aluminium, finished in MIL-STD Type III hardcoat anodising, and adds 8.6 g (0.3 oz). The 2.5mm plate is the subtle one, offsetting the optic by 0.1 in — enough to clear a turret cap, small enough that it barely changes the head position you already have. It carries NSN 1005-01-674-7018. Made in the USA.

Why shooters choose the ROF Riser

• 2.5mm of lift — 0.1 in of offset, enough to clear a turret cap or a large objective bell
• Add-on plate — works with the ROF mount you already own, no need to change the mount
• Billet 7075-T6 aluminium — hardcoat anodised, 8.6 g (0.3 oz)
• One footprint — cut for the Trijicon RMR & SRO pattern, so the optic beds flat and the screws land square
• NSN listed — 1005-01-674-7018

What the ROF Riser fits

Fits Trijicon RMR and SRO, plus Holosun HS407, HE407, HS507, HE507 and HE508 series. The riser mounts to a Reptilia ROF mount rather than to a scope ring, so it is not tied to a ring diameter — it works the same on a 30mm, 34mm or 35mm ROF as long as that ROF is cut for the RMR & SRO footprint. It is not a Picatinny riser and it will not fit an Aimpoint Micro or an Aimpoint ACRO ROF, because those mounts use a different bolt pattern. This listing is the 2.5mm height in Black; the taller plate is the 10mm ROF Riser, which is offered in Black and Flat Dark Earth Anodized.

Which ROF mount does it sit on

Any Reptilia ROF cut for the Trijicon RMR & SRO footprint. That includes the 12 o'clock 30mm ROF-90, 34mm ROF-90 and 35mm ROF-90, and the 45° 30mm ROF-45 and 34mm ROF-45. If you have not bought the mount yet, buy the ROF first and add a riser only if the turret actually fouls — most builds do not need one.

Specifications

Clear the turret, keep the mount. Order the ROF Riser 2.5mm today — in stock at Xtreme Tactical Gun Parts with free tracked UK delivery in 7–10 days.

Explore more: AR-15 Parts & Accessories or browse all Reptilia.