Reptilia AUS Scope Mount 30mm 1.93" Bore Height

The Reptilia AUS Mount is a one-piece riflescope mount for 30mm tube scopes, holding the optic at a 1.93in bore height on any M1913 Picatinny rail.

One tube diameter, one bore height, one machined body. There is nothing here to shim, stack or align — that work was done on the mill.

Reptilia describe the AUS Mount as the culmination of a two-year development programme driven by an end user group. It is machined from billet 7075-T6 aluminium, finished in MIL-STD Type III hardcoat anodising, and clamps to the rail through an anti-snag spring-loaded nitrided steel clamp. This version weighs 166 g (5.9 oz) and takes a 30mm scope tube.

This is the 30mm tube at the tallest AUS height. It suits a chassis with a high adjustable comb, or a shooter who works under night vision and needs the eyepiece to come up to a head-up position rather than pressing down to find it. Reptilia do not publish an objective clearance figure at 1.93in, so measure your objective bell against your own rail rather than assuming the height covers it. Made in the USA.

Why shooters choose the AUS Mount 30mm 1.93"

• 30mm tube, fixed — machined for one ring diameter, so the scope beds on metal rather than on shims
• 1.93in bore height — chosen at the mill, not adjusted on the rifle
• One-piece body — rings and base are the same part, so there is no base-to-ring joint to move
• 166 g (5.9 oz) — billet 7075-T6 aluminium in MIL-STD Type III hardcoat anodising
• Spring-loaded steel clamp — stays open while you place the mount, then closes flush and anti-snag

What the AUS Mount 30mm 1.93" fits

Fits riflescopes with a 30mm main tube, on any M1913 Picatinny rail — the flat-top receiver of a bolt-action precision rifle, a rail-topped action, or a flat-top AR-pattern upper. Reptilia publish no objective clearance figure for this height, so check your objective bell against your own rail before ordering. Tube diameter and bore height are both fixed on this listing and neither is adjustable, so measure your scope's main tube and decide your height before ordering. Reptilia make the same 30mm mount at 1.54in and 1.70in bore heights, and the same 1.93in height for a 34mm tube.

Specifications

Set the height once, then leave the mount alone. Order the AUS Mount 30mm 1.93" today — in stock at Xtreme Tactical Gun Parts with £5 tracked UK delivery in 7–10 business days.

Explore more: Scope Mounts & Optic Risers, Precision Rifle Stocks or browse all Reptilia.