{"product_id":"reptilia-rof-riser-10mm-trijicon-rmr-sro","title":"Reptilia ROF Riser 10mm for Trijicon RMR \u0026 SRO","description":"\u003cp\u003eThe Reptilia ROF Riser is a 10mm spacer plate for the Trijicon RMR \u0026amp; SRO, fitting between a Reptilia ROF mount and the red dot to lift the optic clear of tall turrets and large scope bells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e10mm of clearance, 16.3 g of aluminium. The tall plate, for the scopes that need it.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA ROF mount carries the red dot close to the scope on purpose, and on most builds that is exactly right. Fit a scope with a large objective bell or a genuinely tall body, though, and the dot can end up crowded by the scope or fouled by a turret cap. The riser is Reptilia's answer: an add-on plate that raises the optic on the ROF by a measured amount without changing anything else about the mount.\u003c\/p\u003e\u003cp\u003eIt is machined from billet 7075-T6 aluminium, finished in MIL-STD Type III hardcoat anodising, and adds 16.3 g (0.6 oz). The 10mm plate offsets the optic by roughly 0.4 in — this is the one to reach for when the 2.5mm plate is not enough, typically on a 56mm objective or a scope sitting high in tall rings. Made in the USA.\u003c\/p\u003e\u003ch3\u003eWhy shooters choose the ROF Riser\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm of lift\u003c\/strong\u003e — roughly 0.4 in of offset, for large objective bells and tall scope bodies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd-on plate\u003c\/strong\u003e — works with the ROF mount you already own, no need to change the mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 7075-T6 aluminium\u003c\/strong\u003e — hardcoat anodised, 16.3 g (0.6 oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne footprint\u003c\/strong\u003e — cut for the Trijicon RMR \u0026amp; SRO pattern, so the optic beds flat and the screws land square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo finishes\u003c\/strong\u003e — Black and Flat Dark Earth Anodized, to match the mount underneath\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the ROF Riser fits\u003c\/h3\u003e\u003cp\u003eFits Trijicon RMR and SRO, plus Holosun HS407, HE407, HS507, HE507 and HE508 series. The riser mounts to a Reptilia ROF mount rather than to a scope ring, so it is not tied to a ring diameter — it works the same on a 30mm, 34mm or 35mm ROF as long as that ROF is cut for the RMR \u0026amp; SRO footprint. It is not a Picatinny riser and it will not fit an Aimpoint Micro or an Aimpoint ACRO ROF, because those mounts use a different bolt pattern. This listing is the 10mm height; the subtler plate is the \u003ca href=\"\/products\/reptilia-rof-riser-2-5mm-trijicon-rmr-sro\"\u003e2.5mm ROF Riser\u003c\/a\u003e, which Reptilia make in Black only.\u003c\/p\u003e\u003ch3\u003eWhich ROF mount does it sit on\u003c\/h3\u003e\u003cp\u003eAny Reptilia ROF cut for the Trijicon RMR \u0026amp; SRO footprint. That includes the 12 o'clock \u003ca href=\"\/products\/reptilia-rof-90-30mm-trijicon-rmr-sro\"\u003e30mm ROF-90\u003c\/a\u003e, \u003ca href=\"\/products\/reptilia-rof-90-34mm-trijicon-rmr-sro\"\u003e34mm ROF-90\u003c\/a\u003e and \u003ca href=\"\/products\/reptilia-rof-90-35mm-trijicon-rmr-sro\"\u003e35mm ROF-90\u003c\/a\u003e, and the 45° \u003ca href=\"\/products\/reptilia-rof-45-30mm-trijicon-rmr-sro\"\u003e30mm ROF-45\u003c\/a\u003e and \u003ca href=\"\/products\/reptilia-rof-45-34mm-trijicon-rmr-sro\"\u003e34mm ROF-45\u003c\/a\u003e. Measure the clearance you actually need before choosing a height, because a riser taller than necessary lifts the dot further from the scope's centreline.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eTrijicon RMR and SRO, plus Holosun HS407, HE407, HS507, HE507 and HE508 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRiser plate for Reptilia ROF mounts, 10mm (approx. 0.4 in) offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBillet 7075-T6 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMIL-STD Type III hardcoat anodised — Black, Flat Dark Earth Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.3 g (0.6 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount interface\u003c\/th\u003e\n\u003ctd\u003eReptilia ROF mount cut for the Trijicon RMR \u0026amp; SRO footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eReptilia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMPN\u003c\/th\u003e\n\u003ctd\u003e100-085 · 100-086\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eClear the bell, keep the mount. \u003cstrong\u003eOrder the ROF Riser 10mm today\u003c\/strong\u003e — imported from the USA with all duties paid by us and dispatched tracked from the UK in 7–10 business days, with nothing to pay on delivery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExplore more:\u003c\/strong\u003e \u003ca href=\"\/collections\/ar-15-parts-accessories\"\u003eAR-15 Parts \u0026amp; Accessories\u003c\/a\u003e or browse all \u003ca href=\"\/collections\/reptilia\"\u003eReptilia\u003c\/a\u003e.\u003c\/p\u003e","brand":"Reptilia","offers":[{"title":"Black","offer_id":42843577516112,"sku":"100-085","price":59.99,"currency_code":"GBP","in_stock":true},{"title":"Flat Dark Earth Anodized","offer_id":42843577548880,"sku":"100-086","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/4978\/1328\/files\/reptilia-rof-riser-10mm-trijicon-rmr-sro-black.jpg?v=1786511840","url":"https:\/\/xtremetacticalgunparts.co.uk\/products\/reptilia-rof-riser-10mm-trijicon-rmr-sro","provider":"Xtreme Tactical Gun Parts","version":"1.0","type":"link"}