{"product_id":"holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c","title":"Holosun K Mounting Plate for 507C\/RMR Cut Slides","description":"\u003cp\u003eThe Holosun KPLT-507C is a genuine Holosun adapter plate that lets a K footprint optic sit on a pistol slide already machined for the 507C or Trijicon RMR pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA K footprint sight is narrower than an RMR one, so it cannot simply be dropped into a larger cut. This plate is the piece of metal that bridges the gap, and both sets of screws come with it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a hard anodised plate cut to Holosun's own tolerances, drilled underneath for the 507C and RMR screw pattern and on top for the K pattern used by the 407K, 507K, EPS and EPS Carry. Plate-to-slide and optic-to-plate screws are both supplied, so nothing else has to be sourced before the optic can go on.\u003c\/p\u003e\n\u003cp\u003eThis is the part to reach for when a slide has already been cut for a full-size sight and the optic you want to run is one of the small enclosed or open K series bodies — a build on an RMR-cut host, or moving a K series sight between guns without paying to have another slide machined. Two things it is not: it does not adapt RMR footprint optics such as the 507C or 407C themselves, and it does not fit the 509 rear-lug pattern. Holosun publish no weight or dimensions for the plate.\u003c\/p\u003e\n\u003ch3\u003eWhy shooters choose the KPLT-507C\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptic side\u003c\/strong\u003e — Holosun K footprint, the RMSc pattern used by the 407K, 507K, EPS and EPS Carry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost side\u003c\/strong\u003e — pistol slides cut for the 507C or Trijicon RMR footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware\u003c\/strong\u003e — plate-to-slide and optic-to-plate screws both supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e — hard anodised\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e — genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the KPLT-507C fits\u003c\/h3\u003e\n\u003cp\u003eIt goes on any slide already cut for the 507C or RMR pattern and carries a K footprint optic above it. Other hosts take their own plate in the same family — the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eGlock MOS 9mm\u003c\/a\u003e, the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-fn-509-kplt-fn509\"\u003eFN 509\u003c\/a\u003e and the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c\"\u003eCZ P10 C\u003c\/a\u003e versions.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOptic adapter plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptic Footprint\u003c\/th\u003e\n\u003ctd\u003eHolosun K footprint \/ RMSc pattern (407K, 507K, EPS, EPS Carry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost Cut\u003c\/th\u003e\n\u003ctd\u003e507C \/ Trijicon RMR footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003ePlate-to-slide and optic-to-plate screws included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHolosun\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMPN\u003c\/th\u003e\n\u003ctd\u003eKPLT-507C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eGet the plate right and a small optic sits square and low on a slide that was cut for a larger one. \u003cstrong\u003eOrder the KPLT-507C today\u003c\/strong\u003e — imported from the USA with all duties paid by us and dispatched tracked from the UK in 7–10 business days, with nothing to pay on delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExplore more:\u003c\/strong\u003e \u003ca href=\"\/collections\/optic-mounts\"\u003eOptic Mounts\u003c\/a\u003e, \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eKPLT for Glock MOS 9mm\u003c\/a\u003e or browse all \u003ca href=\"\/collections\/holosun\"\u003eHolosun\u003c\/a\u003e.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":42898724061264,"sku":"KPLT-507C","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/4978\/1328\/files\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c-1.jpg?v=1788746459","url":"https:\/\/xtremetacticalgunparts.co.uk\/products\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c","provider":"Xtreme Tactical Gun Parts","version":"1.0","type":"link"}